Grundig 32 VLE 8130 BL, Инструкция по эксплуатации

Страница: 72 / 80

ENGLISH
­72
speCiAl­settinGs
­----------------------------------------------------------------------------------------------------------
6
Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7 Start the scan with »

« (red).
– All channel and favourites lists will be
deleted and compiled anew.
note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
– The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the
»PROGRAM TABLE« appears.
note:
7
You can abort the search by pressing
» menu «.
8
Press »
menu
« to end the setting.
Automatic­service­update­
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1
Open the menu with »
menu
«.
2
Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press »
oK
« to confirm.
3
Select the line »Automatic Service Update«
with »
v
« or »
Λ
«.
4
Select the automatic update with »
<
« or »
>
«
(»On«).
5
Press »
menu
« to end setting.
searching­for­digital­terrestrial­
tv­channels­manually
1
Open the menu with »
menu
«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press » oK « to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
« or »
Λ
«
and press »
oK
« to confirm.
Select the option »Air« with »
<
«, »
>
«, »
v
« or
»
Λ
« and press »
oK
« to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power«« with
»
v
« or »
Λ
«. Switch on the antenna pow-
er supply for the antenna with »
<
« or »
>
«
(»On«).
5
Select » Digital Manual Tuning« with »
v
« or
»
Λ
« and press »
oK
« to confirm.
– The menu appears.
6
Enter the channel number directly with
»
1­...­0
« and press » oK « to confirm.
– After the search is complete, the channels
found are displayed in the »Results« menu.
7
Press »
menu
« to finish the setting.