Grundig 32 VLC 9140 S, Руководство пользователя

Страница: 47 / 63

­47
ENGLISH
operAtion­usinG­externAl­DeviCes
­-----------------------------
...­with­an­analogue­tv­signal
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
7
Video signal: FBAS.
7
Audio signal: stereo, analogue.
7
»AV2« preset.
1
Connect the »
video
« socket on the television
to the corresponding socket of the external
device with an RCA cable (video signal).
2
Connect the »
l­­r
« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
note:
7
There must not be a video signal at the
»
video
« and »
s-vhs
« socket at the same
time. This could lead to picture disturbances.
using­a­DvD­player,­
DvD­­recorder,­video­recorder­­
or­set-top­box
1 Switch on the external device and select the
function you wish to use.
2
Press » «, use »
v
«, »
Λ
«, »
<
« or »
>
« to
select the preset for the input signal (»AV1«,
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,
»HDMI3«, »HDMI4« or »Component«)
and press »
oK
« to confirm.
headphones
Connecting­the­headphones
1 Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the right
side of the television.
Changing­the­headphone­volume
1
Open the menu with »
menu
«.
2 Select the menu item »SOUND SETTINGS«
with »
v
« or »
Λ
« and press » oK « to con-
firm.
– The »SOUND SETTINGS« menu ap-
pears.
3
Select the line »Headphone« with »
v
« or
»
Λ
«.
4 Set the preferred volume with »
<
« and »
>
«.
5 Press » menu « to end the setting.
note:
7
Prolonged listening with headphones at loud
volumes can damage your hearing.
hi-fi­system/Av­receiver
Connecting­the­hi-fi­system/­
Av­receiver
1­ Connect the » optical­ out « socket on the
television to the corresponding socket of the
device with an optical digital cable (digital
audio signal);
or
connect the » spDiF « socket on the television
to the corresponding socket of the AV receiv-
er with an RCA cable (digital audio signal).
setting­the­audio­format
You can select whether the audio signal out-
put via the » optical­out « or » spDiF « socket
should be in the PCM or AC2 format.
1
Open the menu with »
menu
«.
2 Select the menu item »SOUND SETTINGS«
with »
v
« or »
Λ
« and press » oK « to con-
firm.
– The »SOUND SETTINGS« menu appears.
3
Select »Audio Output Setup« with »
v
« or
»
Λ
« and press » oK « to confirm.
– The menu appears.
4
Select the »SPDIF output« with »
v
« or »
Λ
«.
5 Select the preferred audio format (»PCM« or
»Dolby* D«) with »
<
« or »
>
«.
note:
7
If you wish to output the audio only via a
multi-channel amplifier/AV receiver, set the
option »TV Speaker« to »Off« in the menu.
6
Press »
menu
« to end the setting.