Grundfos Hydro Multi-B CM, Инструкция по установке и эксплуатации

Страница: 14 / 24

English (GB)
14
10.3 Remote-controlled, external stop not activated
In this mode, the system is remote-controlled, and the external stop via digital input is not activated.
If local settings are to be changed, follow the flow chart examples below.
10.4 Remote-controlled, external stop activated
In this mode, the system is remote-controlled, and the external stop via digital input is activated.
If local settings are to be changed, follow the flow chart examples below.
TM
04
95
82
46
10
Keep pressed for 3 seconds
3 . 5
OFF
On
Off
BUS
LOC
On
Off
See section
10.1 Local mode,
external stop not activated
for
changing settings in local mode.
or
or or
or
or
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.
TM0
4
958
3
4
6
1
0
BUS
LOC
E . st
On
Off
On
Off
Keep pressed for 3 seconds
See section
10.2 Local mode,
external stop activated
for changing
settings in local mode.
or
or
or
or
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.