Grundfos DUOLIFT APB Series, Инструкция по установке и эксплуатации

Страница: 10 / 26

En
gl
is
h (
G
B)
10
3.13 Installing the pump connecting pipes
3.13.1 Cutting the flexible tube
The connecting pipes are supplied with a flexible
tube of
∅
50. Cut the tube to a length according to
the table below.
3.13.2 Assembling the pump connecting pipes
Use the thread tape in the kit to seal the threaded
connections.
1. Assemble the connecting pipe outside the tank,
except for the nut. See pos. 1 in fig. 11 .
2. Connect the connecting pipe to the pump in the
tank.
3. Connect the connecting pipe to the outlet of the
tank. Make sure that the pump is in position and
that the float switch, if any, can move freely
before you tighten the nut.
Fig. 11 Example with Unilift KP pumps
Fig. 12 Unilift CC, KP
Pump type
Tube length
[mm]
Unilift CC 240
Unilift KP
350
Not to be cut
Unilift APB 423
SEG 375
TM
04
95
63
20
14
1
TM
05 96
30 391
3