English (GB)
21
9.5.6
Stop on Alarm:
The behaviour of the controller can be defined for every
parameter alarm separately.
Changing the behaviour of the controller
1. Select the desired parameter with the [Up] and [Down]
buttons. Confirm with [OK].
2. Change the parameter alarm value with the [Up] and [Down]
buttons. Confirm with [OK].
– The controller stops when the chosen alarm occurs.
9.5.7
Reset state
Resetting the state of the controller
1. Select "
Reset state
" with the [Up] and [Down] buttons.
2. Confirm with [OK] to reset the state of the controller.
– The controller value is set to 0 %.
– For the PID controller, all three parts are set to 0 (P = 0, I =
0, D = 0).
9.6 Alarm setup
An alarm can be acknowledged with [OK]. If the reason of the
alarm is still present, a new alarm will be generated immediately.
9.7 USB menu / Data transfer
The USB menu is activated when an USB stick is plugged in the
USB slot.
Copying all data to the USB stick
1. Select "
Copy results
" with the [Up] and [Down] buttons.
2. Confirm with [OK] to copy all data to the USB stick.
3. The copied data are stored in a result file in .txt format. See
.
Deleting all data
1. Select "
Delete results
" with the [Up] and [Down] buttons.
2. Confirm with [OK] button to delete the data.
Copying all logfiles to the USB stick
1. Select "
Copy logfile
" with the [Up] and [Down] buttons.
2. Confirm with [OK] to copy the data to the USB stick.
Deleting all logfiles
1. Select "
Delete logs
" with the [Up] and [Down] buttons.
2. Confirm with [OK] to delete the logfiles.
∨
C2
Stop on Alarm:
►
FCL:
------------
pH:
Up/Low
Temp.:
Upper
"FCL"
"---------"
The controller does not react or stop on an
FCL alarm
"pH"
"
Up/Low
"
The controller stops, if the lower or upper
alarm limit is reached.
"
Temp.:
"
"
Upper
"
The controller stops, if the upper alarm
limit is reached.
<
AP001 A1/1
2015/Oct/05
16:42:21
%ls above
lower alarm limit
"AP001 A1/1"
The amount of alarms and the number of
the selected alarm
"2015/Oct/05"
The date of occurrence of the alarm
"16:42:21"
The time of occurrence of the alarm
"
%ls above
"
"
lower alarm limit
"
The alarm message
USB data transfer
►
Copy results
Delete results
Copy logfile
Delete logs
Update software
"
Copy results
" All data regarding the parameters and controllers
are copied to the USB stick.
"
Delete results
" All data regarding the parameters and controllers
are deleted.
"
Copy logfile
"
All data regarding the system logfiles are copied
to the USB stick.
"
Delete logs
"
All system logfiles are deleted.
"
Update
software
"
The software of the CU 382 control unit can be
updated in the field with an USB stick. A file
called "image.hex" has to be in the root directory
of the USB stick. If the software update was
successful, a message appears and the CU 382
control unit restarts.