Grunbeck GENO-fine FME 100, Руководство по эксплуатации

Страница: 12 / 40

Product description
12 | 40
B
A
_
T
D3
-A
F
0
0
0
e
n
_
0
0
4
_
F
M
E
.d
o
cx
3.4 Functional description
The unfiltered drinking water flows into the filter from the inlet side and then passes through
the filter elements to the pure water outlet.
In the course of this process, foreign particles > 80 µm in size (standard), for FME-KW
> 500 µm (standard) are retained.
Depending on their size and weight, the foreign particles either stick to the filter element or
fall straight down where they accumulate at the lowest point of the filter.
Due to the growing load of the filter elements, the differential pressure between the raw
water inlet and the pure water outlet increases.
If the differential pressure of 0.8 bar at the flow rate of the filter is exceeded, the filter
elements must be replaced.
The locking system of the cover ensures the trouble-free and quick replacement of the filter
elements without any tools.
3.5 Accessories
You can retrofit your product with additional accessories. Please contact your local
Grünbeck representative or Grünbeck’s headquarters in Hoechstaedt for more details
(refer to www.gruenbeck.com).
Designation Order no.
DN 50 DN 65 DN 80 DN 100
5 µm filter elements 103 083
50 µm filter elements 103 070
100 µm filter elements 103 110
Quantity 2
Illustration Product Order no.
Differential pressure switch
With electric contactor, continuously adjustable for visual or acoustic
remote signal
102 870
Hose extension kit for differential pressure switch 102 850
Installation adapter
To stabilise the filter on the ground
Subject to project
Parallel piping of two GENO-fine filters Subject to project