Gruetzner LUBRICUS LUB-V, Руководство пользователя

Страница: 50 / 86

48
Emptying time t
EZ
= 12 The emptying time t
EZ
of the
cartridge is 12 months.
Number of lubrication strokes C = 1 The number of lubrication strokes
is one (1) per outlet and per pump
cycle.

The default settings result in an emptying time t
EZ
(service life) for a full lubricant cartridge with
250 ml or 400 ml content of 12 months when using an LUB-V with one (1) outlet in the operating
mode empty time mode, provided that the LUB-V is permanently switched on and no special lu-
brication strokes were carried out, e.g. by the filling or quick check menu. The LUB-V calculates
a lubrication cycle time of approx. 5.2 hours when using a cartridge with 250 ml content and a
lubrication cycle time of approx. 3.3 hours when using a cartridge with 400 ml content. The lu-
brication cycle duration depends on the number of outlets of the present LUB-V and the selected
cartridge size.

If you use the LUB-V with one (1) lubricant outlet, a pump cycle of one lubrication stroke from
the one outlet is performed at the beginning of the lubrication cycle duration t
SZ
. If you use the
LUB-V with two (2) lubricant outlets, a pump cycle of one stroke per outlet is performed at the
beginning of the lubrication cycle duration. The lubrication cycle duration is doubled.

Determine whether the default settings are applicable to your application and whether the lu-
brication point is supplied with the correct amount of lubricant per time unit.
If this is the case, you can operate the LUB-V in the operating mode Empty time mode with the
default settings.
If this is
not the case, change the value for the emptying time t
EZ
and/or the number of lubrication
strokes C per pump cycle PZ accordingly: This chapter explains how to make these changes.

To use the LUB-V, it must first be properly mounted and installed and then switched on. Moun-
ting is very simple and described in detail in Chap. 5; switching on is described in Chap. 6.3.1.
Definitions of the adjustable parameters for the emptying time t
EZ
and the number of lubrication
strokes C per pump cycle PZ and their respective permissible values:
t
EZ
:= emptying time in months (m).
The emptying time can be set between 1 | 2 | 3 | ... | 36 months.
C := number of lubrication strokes during a pump cycle PZ.
The number of cycles c can be set between 1 | 2 | 3 | ... | 30 strokes.
Default settings Operating mode Empty time mode: