6
Prohibited methods of operation
Operational security of the Lubricus Lubrication System is only guaranteed if it
is operated in accordance with the
operating instructions
. The limit values stated in the technical data must not be exceeded under any circumstances.
General risk reference
All components of the system are designed in accordance with the prevailing regulations of the construction
of technical machines, in regards to operational safety and accident prevention. Operation outside of these
constraints can lead to dangers for the user respectively third persons or other technical facilities. The
Lubricus Lubrication System therefore may fulfil only in
technically fault-free condition
its intended use.
This may only be carried out under compliance of the safety regulations and the attention of the operator's
manual.
Therefore please
regularly inspect
the pump and its attachments for possible
damage
or
leaks
.
Transport and storage
Use suitable lifting gear for transport.
Do not throw or expose the Lubricus Lubrication System to strong shock loads.
Store the Lubricus Lubrication System
in a cool and dry place to avoid corrosion of the system’s individual parts.
Pay attention to the current safety- and accident prevention instructions during the transport. Wear suitable
protection equipment if necessary!
Installation instruction
The following conditions have to be satisfied during the installation of this Lubricus Lubrication System, thus it
can be assembled, with other parts, to a complete machine without affecting the safety and health of
humans.
The housing of Lubricus should not be exposed to direct sunlight and/or radiant heat preventing the
formation of condensation.
Electrical connection
•
Have the electric power supply connected only by a trained electrician!
•
Connection and wiring of the electric components should be done by an expert trained in this field.
•
Check the voltage details with the existing power supply voltage!
Maintenance /repair
Disconnect the voltage feed, before starting with
maintenance or repair.
Maintenance and repair
work may only be done with the system shut down.
Check the surface temperature of Lubricus Lubrication System, due to danger of burning by radiant heat.
Always wear heat-resistance gloves! Protect the system from activation during maintenance and repair work!
