10
• Always wear protection gear like safety goggles, gloves, apron,
and ear plugs while operating the pump
• Never smoke near the pump. Do not use the pump near a source
of spark / open flames
• DO NOT under any circumstances put you fingers inside the
pump with the electric power connected. Serious injury can
occur.
• Always switch off the motor after use, so that media cannot leak
in case any of the pump component fails
• Before switching on the motor, check hoses for sign of wear, leak
or loose fittings
•
If the temperature of motor goes above 85°C, the motor stops
working for a few minutes. It automatically starts once its
temperature falls down to 65°C.
• When changing the working fluid, at least 1 litre of new fluid
should be discarded to avoid mixing of fluids
• Pump should NOT be operated for more than 30 minutes
continuously. Wait for 30 Minutes before restarting the pump
• Before attempting any maintenance or repair of this product,
disconnect power supply and then squeeze Nozzle trigger to
release any built up pressure from hose / pump
• Use only genuine factory parts for repair
SPECIFICATIONS
12V DC
24V DC
Flow Rate (at pump outlet)
Up to 12 GPM (46 LPM)
Motor
1/4 HP 12V DC
1/4 HP 24V DC
Amp draw from Battery
16 Amp
9 Amp
RPM
2600
Duty Cycle
30 mins. On / 30 mins Off
Internal bypass valve
Yes
Hose
4m X 3/4” ID
- in Base Plate Style
3m X 3/4” ID
- in Drum Mount Style
Pump Inlet
3/4” (F)
- in Base Plate Style
1” (F)
- in Drum Mount Style
Pump Outlet
3/4" NPT
Battery Cable
2 metre
Safety Fuse
15 Amp
WETTED COMPONENTS
Steel, Aluminum, Zinc, Cast Iron*, Nylon, Nitrile Rubber &
PVC Nitrile
*Only for Drum Mount version
RECOMMENDED USE
Diesel & Kerosene
DO NOT USE WITH
Fluids with a flash point below 100°F (38°C), such as
Gasoline & Alcohol
Sparking could result in explosion causing fatal injury
Table 6
Groz Engineering Tools (P) Ltd.
Groz Net Industries
Village Kherki Daula, National Highway-8
Gurgaon-122001, Haryana, INDIA
TEL +91.124.282.7700 / 221.4050
FAX +91.124.2827986 / 221.4224
FAX (USA) +1.509.271.7848
FAX (UK) +44.870.121.1854
E-MAIL [email protected]
URL www.groz-tools.com
The Groz name, Groz logo and the mark are
trademarks of Groz Engineering Tools (P) Ltd. India
