7
Revision date: 08.30.18
106205_06_07_08
Anchoring & Frame Overview
ATTENTION:
Position purlins evenly
during frame assembly. Refer to Grid
diagram near the back of this guide
(Quick Start section) to position purlins,
end clamps, and cross connectors.
End Rafter
Interior
Rafter
Ground Level
Purlins
Ground Post
(below ground)
ANCHOR ASSEMBLED FRAME
Consult the MUST READ document for anchoring information and suggestions. If
needed, call customer service at 1-800-245-9881 for additional anchoring information.
CAUTION
: The anchor assembly is an integral part of the greenhouse construction.
Improper anchoring may cause instability and failure of the structure to perform as
designed.
Failing to anchor the shelter properly will void the manufacturer’s warranty
and may cause serious injury and damage.
ASSEMBLY OVERVIEW — GENERAL
See illustration below to identify main parts of
greenhouse frame.
1. Locate required parts and instruction guides
for each assembly procedure.
2. Set ground posts (or anchor base plates — if
equipped — to foundation).
3. Assemble rafters and frame.
4. Prepare and attach polycarbonate panels for
end walls —
Guide #1
.
5. Install door —
Guide #1
.
6. Attach flashing and main cover cladding
(polycarbonate) —
Guide #2
.
7. Install accessories (if equipped). See
instructions included with accessory (fans,
shutters, heaters, etc.).
