42
106205_06_07_08
Revision date: 08.30.18
H-Channel Installation Instructions
The new H-channel design requires installation of the flat side facing out with channel side toward building frame. Some diagrams and photos in this document
show installation of original H-channel with channel side facing out. Design of new H-channel does not allow channel-side out installation.
Use the diagrams on this page to install H-channel with flat side facing out.
ATTENTION:
Use only 1-1/2" Tek screws to attach H-channel to building frame.
Do not use shorter screws. They will not
hold. Do not use washers on Tek screws when installing H-channel.
ATTENTION:
Install all twin-wall poly carbonate panels with UV-protected side toward the sun.
UV-protected side
toward sun.
Install 1-1/2" Tek screws through
H-channel into building frame.
H-Channel
Center Groove
Flat side toward the sun.
Flat
Side
Channel