5
GROWSPAN
™
CANOPY-TOP COLD FRAME
Revision date: 02.08.18
If the couplers do not have an installed lock bolt, u
se a self-tapping Tek screw
to secure pipes to couplers during
assembly. The self-tapping Tek screws are included.
ATTENTION:
Tek screws are sent with all shelters of this type. For couplers with locking eyebolts, install Tek screws at
each pipe connection for additional security if desired.
WARNING:
To prevent personal injury and damage to shelter,
install a Tek screw
at each pipe and coupler joint. To
prevent cover damage, install Tek screw so that it
does not
touch main cover or any optional side or end panels once
these are installed.
3-Way Coupler (no lock bolt)
3-Way Coupler (includes lock bolt)
The following graphics and photos will help identify the different parts. Some parts are not shown.
102191
3-Way Coupler
102192
4-Way Coupler
ADDITIONAL PARTS IDENTIFICATION NOTES
In some instances, there can be differences between parts shown and referenced in the instructions and parts that ship
with the shelter. These differences
do not
affect shelter integrity, but can change the assembly procedures.
The information that follows identifies
possible changes
in assembly procedure found in this instruction document.
Please
implement these changes during assembly if needed.
There can be two types of couplers used during assembly: those
that include an installed locking eyebolt and those that do not. See above.
ASSEMBLY NOTE:
Install Tek screws
using a clutched drill driver running
approximately 750 RPM while applying
approximately 50 lbs of force.
Do not use an impact driver!
FA4470B
#12 x 3/4" Tek Screw
