14
13
5.1 WiFi Configuration
a) Choose a related power plant after adding the device (Note: a power plant is required to
build before adding the EV Charger).
b) Enter the serial number of the EV charger or scan the Bar/QR code to add the EV charger
c) Select “WiFi” for network configuration.
d) Enable the “WLAN” in the setting and connect to the “WIFI” whose name is consistent
with the serial number of the EV charger, then enter the WiFi password (default WiFi
password is: 12345678) and click “next”.
e) Enter the WiFi name and password of your router (the connected WiFi is required 2.4GHz
WiFi, and the network should be available), and then click “Next”.
f) Please wait 2-5 minutes and refresh the EV charger status to confirm whether the
communication is successful.
Note: If the EV charger has been configured before, and don’t need to configure the network
again.
V.
EV charger Internet configuration
