Grove toucan 1010, Руководство по обслуживанию

Страница: 57 / 73

57
Models
Revision 02-2000
Toucan 1010
Description and parameters values for Toucan 1010 models.
Calibrator use as measuring instrument :
BATT V :
The measure of battery voltage can be done at any time,
even when the work platform is in operation, thus
enabling analysis, if necessary, of the battery voltage
fluctuations.
MOTOR V :
The measure of the motor voltage in operation enables
the determination, for a chosen speed, of the voltage to
be applied at the motor terminals. The value of this voltage
calculated in percentage of the battery voltage determines
the speed setting.
MOTOR AMP. :
The measure of the current at the motor enables the
determination of the current limit value to which the
controller must be set when the machine is driven on a
ramp.
TEMP °C :
The measure of the temperature enables the analysis of
the controller temperature increases, therefore the
operating conditions of the work platform.
Parameter Description Unit Step
Values
Toucan
1010
Comments
Speed 1 Speed n°1 (variable) % 1%
45
First gear drive speed.
Mast and jib lowering function speed
Swing movement speed from platform
controls.
Speed 2 Speed n°2 (variable) % 1% 50
Jib raising function speed from platform
controls.
Mast raising function speed from ground
controls.
Speed 3 Speed n°3 (variable) % 1% 80
Mast raising function speed from platform
controls.
Speed 4 Speed n°4 (variable) % 1% 100
Drive speed in 2
nd
and 3
rd
gear.
Speed 5 Speed n°5 (variable) % 1% 0 Not used.
Speed 6 Speed n°6 (variable) % 1%
0
Not used.
Speed 7 Speed n°7 (fixed) % 1%
45
Speed of movements from the emergency
control panel (Ground controls).
Speed 8 Speed n°8 (fixed) % 1% 30
Pump speed for make-up flow to hydraulic
wheel motors.
Creep%VB
Starting threshold % 1% 10
Ramp sec Ramp shape sec. 0,1 1 1 second max.
Extra % Additional speed % 1%
0
Not used.
Imax Amp. Current limit Amp. 10 400
Batt V Battery voltage Volt
Motor V Motor voltage Volt
Motor Amp. Motor current Amp.
Temp °C
Temperature of mosfet
radiator
°C
Test Test Mode - Refer to "Calibrator use as operating control instrument"
Refer to "Calibrator use as measuring instrument"
MAINTENANCE 5 5