Grouser Ag Pro Plus Undercarriage, Руководство по установке

Страница: 2 / 8

2
To The Owner
This manual contains information concerning the installation of the undercarriage. You have purchased dependable,
long lasting equipment, but only by proper care and operation can you expect to receive the performance and long
service built into our products. Please read this manual carefully and keep the manual available for ready reference.
If you have any questions or concerns, contact Grouser Products.
Caution:
• Always use caution when working around any
equipment.
• Always wear safety glasses.
• Follow tractor manufacturer’s safety guidelines
when installing this product.
• Use paint where necessary to prevent rust.
• Do not modify or permit anyone else to modify
or alter the equipment and its components
without first consulting Grouser Products.
Note:
• Read all instructions prior to performing
installation.
• When installing hardware, only finger tighten
until all hardware is in place.
• A full diagram of the assembly with the full list
of parts is on pages 6-7.
• Unstrap and remove any components that are
attached for shipping.
Pre-Installation
1. If applicable, remove front weights and weight bracket from front of tractor.
Serial Number Location
Undercarriage Installation
3. Position and center the undercarriage under the tractor.
NOTE: When lifting the undercarriage, watch for any
potential pinching of hoses or any other components to
prevent any damage.
A
2. If necessary, remove the switch guard from the left side of the tractor (A) . Reinstall the hardware without the
switch guard.
B
B
4.
Lift the undercarriage until the holes on the tractor line up
with the holes on the undercarriage and the rear pins of the
undercarriage are inserted into the rear bottom slots on the
tractor (B) .