Distance wheel can be firmly held by hand ‘C’ to
assist in the slackening of the 13mm bolt ‘D’
D
C
E
Cover plate ‘E’ can then be removed from the pawl
wheel.
To carry out removal of replacement PAWLS from the pawl wheel the machine will need to be tilted as far
forward as possible. This will lift the rear of the machine to expose the pawl wheel and chop off blade as-
sembly.
To commence the removal of the pawls to change
the length of chop, firstly move the 13mm bolt at
‘A’ then remove the cover plate ‘B’
A
REMOVAL OF PAWLS
B
Operating Instructions
Page 8
