Pawl at ‘A’ can be held with fingers, then pin ‘B’
can be pulled out (may require pointed pliers to
grip)
This is a close up picture of the sticker attached to
the TCGCO and shows the distance measurement
at 'A' and the No of pawls see 'B', the setting as
supplied from factory is shown at 'C' this is 7 pawls
and the shortest length which is 1metre.
A
B
C
REMOVAL OF PAWLS
B
A
Pawl at ‘A’ is then removed from the wheel, this
process can be carried out on further pawls
depending on the distance setting required.
When pawls have been removed or added to the
users requirements then replace cover plate and
bolt to secure.
Operating Instructions
Operating Instructions
Page 9
Page 10
