To carry out the removal and replacement of CHOP BLADE the machine will need to be tilted as far for-
ward as possible. This will lift the rear of the machine to expose the pawl wheel and chop off blade assem-
bly (as is carried out for pawl removal).
Chop blades can be supplied in widths of 12 inches (30cm), 14 inches (35cm), 16 inches (40cm), 18 inches
(45cm) and 20 inches (50cm)
A
B
C
To remove chop blade 'A', firstly remove three
clamp bolts 'B' and lift off the blade
To adjust chop blade 'A' firstly slacken the three
clamp bolts 'B' then slide the blade up or down
the clamp bolt slots 'C' to achieve the required
depth of cut
.
REPLACING AND ADJUSTING OF CHOP BLADE
Operating Instructions
Page 10
