3
To minimize damage to the cables, take care that they do not pass sharp edged metal.
Lay all cables as far away as possible from the ignition cables, modules in the boot and under the
key dashboard, as this create interference.
Add a fuse into the (+) power cable in a distance of not more than 30cm (11.81”) from the
positive battery pole. Keep the length of the power wires as short as possible. It is better to use
power cables which are short and then longer speaker cables.
In order to reduce interference, also pay attention to the instructions.
COMMON FEATURES
•
Drive delay II (2 second) control circuitry
•
Triple protection
•
2 Ohm stable stereo
•
PWM mosfet supply
•
Power & protection indicators
•
Variable highpass filter 50 - 250Hz
•
Variable lowpass filter 50 - 250 Hz
•
Bass Boost switch: +6dB / +12dB @ 50 Hz
•
Adjustable input sensitivity
•
Aluminium heat sink
•
Platinum terminals
•
Low (RCA) Level Inputs
WARNING
High powered audio systems in a vehicle are capable of generating „Live Concert“ high level of
sound pressure, continued exposure to excessively high volume sound levels may cause hearing loss
or damage. Also, operation of a motor vehicle while listening to audio equipment at high volume
levels may impair your ability to hear external sound such as horns, warning signals or emergency
vehicles, thus constituting to a potential traffic hazard. In the interest of safety, we recommend
listening at lower volume levels while driving.
4
FEATURES
