AMPLIFIER
Owner’s manual
TITANIUM
GZTA 4.24VDC
•
24Volt
4-Channel Amplifier
•
Especially for Trucks
with 24V on-board voltage
2
PLEASE READ BEFORE INSTALLATION
Thank you for selecting a
GROUND ZERO
Titanium Amplifier.
We are providing a helpful hints list which should keep you from
Experiencing unnecessary shut down.
INTRODUCTION
This power amplifier has been designed to provide high quality performance with a minimum of
maintenance. However, its performance will only be as good as the care and quality of
components with which is installed. We therefore advise that you read these instructions very
carefully to familiarize yourself with the product and its features.
Before installing the power amplifier please read this instruction manual carefully. The
instructions for mounting and connection the set have to be followed precisely. If necessary, a
service center should be consulted.
All connections for DC power, signal input and speaker outputs can be carried out easily and
safely by way of RCA and screwed terminals.
INSTALLATION INSTRUCTIONS
Please choose a mounting place without any direct weather influences. Note that the amplifier
generates heat so that a well ventilated place is necessary. According to your car’s construction
the set can be made very carefully in order to ensure the amplifier’s full performance and
reliability.
Keep the wire connections as short as possible with sufficient dimensions in order to minimize
power losses and provide a higher audio output of the system.
For safety reasons route all power and speaker wiring by using the exiting wire channels.
