Grossenbacher Systeme 50 81 379, Описание устройства

Страница: 19 / 55

E thernet P anel
Hardware EthernetPanel
© 2010 by Grossenbacher Systeme AG DVS 60646 V1.0 19
5.9 C
ONNECTION FOR
COM1
SERIAL INTERFACE
(RS232)
The serial Interface COM1 is PC-compatible. This interface is not isolated.
The GND connection is implemented directly on the housing potential (
Î
Section 11).
Connector Pin No. Signal Description
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
Connector
9pole
8 CTS
SubD 9 RI
Cables connected to the programming interface (Ethernet or serial) must be
laid separately from the low-voltage cables.
To ensure disturbance-free operation, it is strongly
recommended to use cables with shield.
5.10 CAN
INTERFACE
The communication interface is defined in accordance with the CiA CAN
Specification V2.0 part B. The fully-integrated CAN unit supports the sending
and receiving of frames with an 11-bit identifier. The type of configuration
selected depends on the software protocol. The baud rate can be selected in
a wide range, and only the standard CiA baud rates are implemented.
CAN connector
Sub-D 9 Pole male
Connect
or
Pin No. Assignme
nt
Function
1 -
2 CAN
LOW
Negative data signal
3 GND Signal Ground (ground potential)
4 -
5 -
6 GND Signal Ground (ground potential)
7 CAN
HIGH
Positive data signal
8 -
9 -
Case Case Cable shield
The CAN interface is NOT isolated.
The max. baud rate is 1MBit/s.
1 2 3 4 5
6 7 8 9
5
5
9
4
8
3
7
2
6
1
5
9
4
8
3
7
2
6
1
1 2 3 4 5
6 7 8 9
6
DVS 60646-V1.0