17
Multi-Function Saw Safety Warnings
Read operating instructions before use. Save operating instructions for future reference. Do not use the
machine before reading the operating instructions on settings, defects and troubleshooting.
Do not operate the power tool near fl ammable materials (solvents, benzine, other fl ammable volatile
substances). Motor of the power tool creates sparks that could lead to explosion or ignition.
This ma-
chine may not be used in volatile environment.
Before any maintenance or service work on the machine, make sure that the machine is unplugged.
Avoid unintentional starting. Always pull the mains plug when the machine is not used. Ensure that the
On/Off switch is in the “Off ” position. Plugging the machine to the mains with the On/Off switch on the
“On” position may lead to unintentional starting which causes a safety risk.
Wear safety goggles!
Check the wheel guard condition. When guards do not work properly, do not slide back and do not
open easily, have the machine serviced.
Do not point the laser marker light at eyes. It may cause eye injury.
Before use, check the tool condition - check if wheels are not cracked and the cutting edge is in a good
condition.
NOISE AND VIBRATION INFORMATION:
Measured values were determined according to EN 60745 standard. The A-weighted noise level of the
product may exceed the sound pressure level of 82 dB(A).
Wear hearing protection!
Unit
2536-760600
GPC 6-89 GL
Vibration emission value ah
m/s
2
>10
Measurement uncertainty value K
m/s
2
1,5
Pilarka_precyzyjna_Full_v04_HR.indd 17
Pilarka_precyzyjna_Full_v04_HR.indd 17
2016-10-19 04:02:59
2016-10-19 04:02:59
