Gröne 2560-421500, Руководство пользователя

Страница: 57 / 350

57
E5
Detection of pressure ir-
regularities or lack of sig-
nal from the sensor
The motor
will stop
When the pressure signal is
back to normal, the motor
automatically will function
again Check the pressure sensor,
check the connections with
converter, with LCD or PC
screens
E7
Overloaded motor or
overheated electronics The motor
will stop Switch off and on to reboot
the device
Check the motor and cables
and too tightly tightened
sealants
E9
Maximum pressure
exceeded The motor
will stop
When the pressure signal is
back to normal, the motor
automatically will function
again
Check the pressure sensor
E61
Voltage below minimum
values (220 V models:
below 200 V while rest-
ing, below 180 V while
used for work)
The motor
will stop
When the voltage is back
to normal, the motor auto-
matically will function again
Check the power supply
voltage
E62
Voltage exceeding
the maximum (220 V
models: over 260 V)
The motor
will stop
When the voltage is back
to normal, the motor auto-
matically will function again
Check the power supply
voltage
WARNING: all repair works must be absolutely referred to the authorised customer service centre.
Improper repair works can lead to injuries or even death.
TECHNICAL DATA
Model UltraSpray 42
Motor type BLDC, ventilator cooling
Input power 1500 W
Voltage 230 V
Max. tip size 0.031”
Max. flow rate 4.2 l/min
Max. pressure 227 bar
Measurements (L × W × H) 670 mm × 580 mm × 810 mm
Net weight 59 kg
Applied materials:
Woodwork Varnish, enamel
Building Primers, emulsions, acrylics, latexes
Anticorrosive protection Polyurethanes, epoxides, alkyds
PROBLEM SOLVING
Problem: the motor is not working
Check: Solution:
power supply – must be in compliance with the volt-
age indicated on the device nameplate
use a proper socket
extension cord – continuity replace the extension cord