Gröne 2532-321500, Руководство пользователя, Страница: 31 / 258

31
e. Acc eptable rotational speed of the used working tool cannot be lower than the speed
indicated on the power tool. The working tool, rotating quicker than acceptable speed, can
break and its parts can chip off .
f. The working tool should be used according with its intended purpose. Milling cutters
remove the material with the edge of the cutter and it is prohibited to grind with a side surface
of the wheel! Side pressure can lead to fracturing of the wheel.
g. The sizes of working tools and their mounting collars must match exactly the sizes
of the power tool’s spindle. Working tools with improper sizes can cause excessive vibration
or loss of control over the tool.
h. Do not use damaged working tools or mounting elements. Check the abrasive wheel if it
has any chip-off s, fractures or dents before you start working with a tool. If any irregularities
are noticed, immediately replace the working element with a new, fl awless one. Damaged
wheel can fracture even during the start-up of the power tool.
i. If the power tool or the working tool fall, check whether it was not damaged or use
other, undamaged tool.
If the tool has been checked and mounted, the power tool should
be switched on with the highest speed. Pay attention so that the operator and other people
in vicinity are beyond the reach of the revolving tool. Damaged tools most commonly fracture
in this trial period.
j. Do not use any working tools requiring water cooling. It can lead to electric shock.
k. The tool should always be held by handles in both hands and the power cord should run
behind the tool. There is a risk of dragging of loose clothes, power cord and other objects
within the reach of working tool.
l. Do not use for cutting very small elements. They can be discarded while cutting.
m. Kee p your hands away from the cutting area and do not place hands underneath the pro-
cessed element. Risk of injury and limb amputation.
n. Sha vings and dust must be removed only after the tool has been switched off . After
the work is fi nished, the wheels can remain hot. Wear protective gloves.
o. Do not carry operating power tool. Loose clothes or power cord can be accidentally caught
by revolving working tool. Risk of electric shock or body injuries.
p. Und er no circumstances should you put the power tool away before the working tool
stops completely. Revolving tool can come into contact with the surface on which it was put
away, which can lead to the loss of control over the power tool.
q. Avo id unintentional start-ups of the tool. Before you plug the cord into the socket or while
carrying the tool, make sure you do not accidentally press on the switch.
r. Whi le cleaning the saw, do not use aggressive nor caustic chemical agents including
petrol, solvents nor other petroleum-derived agents.
s. Kee p the tool away from heat sources. Do not store it in damp nor wet places . If the water
gets into the power tool, the risk of electric shock rises.
Whi le working you can fi nd elements of: electric, hydraulic or gas systems which are located
in walls. It can pose a serious threat to life or health.
Before you start working the area should be
examined with e.g. a metal detector and the tool should be held by isolated handles.
The particles of the processed materials released in work can contain: carcinogens, substances
causing allergic reactions, pulmonary diseases or fertility disorders.
It can include substances such
as paints containing lead, mineral dust from stones and concrete, wood protection, as well as parts
of metal and asbestos. The risk level depends on the time of user exposure to dust. In order to reduce
the risk, make sure the working space is properly ventilated and appropriate individual protection is
worn!