Groen DH-40, Руководство оператора

Страница: 5 / 32

OM-DH
5
Equipment Description
The Groen DH is a floor-mounted, tilting, steam
jacketed kettle with a thermostatically controlled,
self-contained, gas-heated steam source and
appropriate controls, mounted on a sturdy base.
The Model DH is available in 20, 40 or 60 gallon
capacities.
The body of the DH Kettle is constructed of
stainless steel, welded into one solid piece. The
kettle is furnished with a reinforced rim and a
butterfly shaped pouring lip. It has a steam
jacket which is ASME shop inspected and
registered with the national board for working
pressures up to 50 PSI. Kettle finish is 180
emery grit on the inside and bright high buff
polish on the outside.
The kettle is tilted with a hand crank to pour out
its contents. Stainless steel panels enclose the
controls and the base. Four stainless steel
tubular legs support the unit. Bullet feet on
each of the legs can be adjusted to level the
kettle. Standard DHT units include a two inch
tangent draw-off valve.
The self-contained steam source is heated by
propane or natural gas. Ignition is electronic.
The kettle is charged at the factory with
chemically pure water which contains rust
inhibitors. The steam source provides kettle
temperatures of 150º to approximately 295ºF (65
to 150ºC). Unit controls include a thermostat,
pressure gauge, safety valve, pressure limit
control, low water cut-off, power switch and gas
regulator valve. The gas supply shuts off
automatically when the kettle is tilted.
The unit must be specified for use with natural or
propane gas. Service connections for gas and
electricity are required. Standard power supply is
115 Volt. Alternate voltages (208V or 240V) are
available.
KETTLE CHARACTERISTICS
DH-20 DHT-20 DH/1-40 DHT/1-40 DH-60 DHT-60
Kettle Capacity
20 gal
(75 ltr)
20 gal.
(75 ltr)
40 gal.
(150 ltr)
40 gal.
(150 ltr)
60 gal.
(225 ltr)
60 gal.
(225 ltr)
Tangent drawoff No Yes No Yes No Yes
Jacket Capacity
5 gal.
(19 ltr)
5 gal.
(19 ltr)
6 gal.
(22¾ ltr)
6 gal.
(22¾ ltr)
14 gal.
(53 ltr)
14 gal.
(53 ltr)
Kettle Body
Diameter 20 in.
(508 mm)
20 in.
(508 mm)
26 in.
(660 mcm)
26 in.
(660 mm)
30 in.
(762 mm)
30 in.
(762 mm)
Base Width
35 in.
(889 mm)
35 in.
(889 mm)
47 in.
(1194 mm)
47 in.
(1194 mm)
47 in.
(1194 mm)
47 in.
(1194 mm)
Base Front to
Back 29
(736 mm)
29
(736 mm)
29
(736 mm)
29
(736 mm)
29
(736 mm)
29
(736 mm)
Firing Rate - per
hour
72,000 BTU 72,000 BTU 100,000 BTU 100,000 BTU 150,000 BTU 150,000 BTU
Energy into
Product per hr.
44,140 BTU 44,140 BTU 65,000 BTU 65,000 BTU 93,000 BTU 93,000 BTU
Options available with listed models are:
1. Two inch tangent drawoff*
2. Strainers, solid disk, ¼ or
c
inch holes
3. No. 31 lift-off cover
4. No. 51 counterbalanced cover w/actuator*
5. Basket Inserts (Tri-BC)
6. Water fill faucets with swing spout
7. Kettle Brush Kit
8. Stainless steel liner*
* Factory-installed options