manualshive.com logo in svg

Groen DEE series, Руководство оператора и по обслуживанию

Поделиться
Скачать
Groen DEE series Скачать руководство пользователя страница 5

OM/SM-DEE (CE)

5

The unit will be bolted or banded to a skid, inside of a heavy
container.  Be careful when cutting shipping straps.

Optional equipment available with DEE/4 kettles:

1. 2" or 3" diameter tangent draw-off valve (factory-

installed)

2. Lift-off cover

3. Counterbalanced cover (factory-installed)
4. TRI-BC basket cooking system
5. Water fill faucets
6. Kettle brush kit

Inspection & Unpacking

The unit will arrive in a heavy shipping carton and will
be bolted or banded to a skid. Immediately upon
receipt, inspect the carton carefully for exterior
damage. 

CAUTION

SHIPPING  STRAPS  ARE  UNDER  TENSION
AND  CAN  SNAP  BACK  WHEN CUT. TAKE
CARE  TO  AVOID  PERSONAL INJURY OR
DAMAGE TO THE UNIT BY STAPLES LEFT
IN THE WALLS OF THE CARTON.

Carefully cut any straps from around the carton and
detach the sides of the box from the skid. Pull the
carton up off the unit.

Thoroughly inspect the unit for concealed damage.
Report any shipping damage or incorrect shipments
to the delivery agent.

Write down the model number, serial number, and
installation date, and retain this information for future
reference. Space for these entries is provided at the
top of the Service Log at the back of  this manual.   
Keep this manual on file and available for operators to
use.

CAUTION

THIS  UNIT  IS  VERY  HEAVY.  INSTALLER
SHOULD OBTAIN HELP AS NEEDED TO
LIFT THIS WEIGHT SAFELY.

When installation is to begin, carefully cut any straps
which hold the unit on the skid. Lift the unit straight up
off the skid. Examine packing materials to be sure
loose parts are not discarded with the materials. 

Содержание DEE series




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды