GRNLITE Par 3-36, Руководство пользователя

Страница: 6 / 14

GRN Par 3-36 v5.9
GRN lite.com
Fixture placement & hanging
The fixture uses a standard yoke for attachments. Half-couplers or Pipe clamps should be used for
hanging the fixtures from standard truss. Ground support should be weighted stands or something
similar. The yoke clutch should be loosened (rotate counter clockwise) before attempting to rotate the
fixture in the yoke. Rotate the clutch handle clockwise to retighten.
A safety cable should be used for every fixture when hung. Fixtures that are used on the ground do
not need a safety.
NOTE: The GRN Par 3-36 fixtures may be mounted in any orientation as long as the attachment
is secure.
Maintenance
There is no standard maintenance required for the GRN Par 3-36 fixtures. Even though all
hardware is secured with threadlocker or locking hardware, it is always a good idea to look for any loose
or missing hardware, and tighten or replace as needed. The friction clutch on the yoke is rugged, but if
forcibly over-rotated, the clutch may be damaged. The friction clutch should be loosened before
attempting to rotate the fixture in the yoke.
NOTE: All repairs of electronic or structural issues should be done by qualified personnel.
Page 4