Grizzly T32536, Руководство пользователя

Страница: 23 / 44

Tailstock quill must ALWAYS be locked in
place during lathe operation. Before tight-
ening quill lock handle, set screw in front
of handle must be properly aligned with
quill keyway. Otherwise, workpiece can be
thrown from lathe, causing serious personal
injury or death.
Figure 16. Tailstock center installed in quill.
Figure 17. Tailstock quill alignment slot.
Model T32536 (Mfd. Since 10/20)
-21-
Installing/Removing
Tailstock Center
The included live center installs into the tailstock
quill with an MT#1 tapered fit.
Removing Tailstock Center
1. Loosen quill-lock handle.
2. Hold a clean rag under spindle or wear a
glove to catch center when you remove it.
3. Rotate
quill adjustment knob
counterclockwise—tailstock quill will retract
back into quill, causing center to be forced
out. If necessary, use knockout tool to remove
center.
2. Make sure mating surfaces of center and
quill are free of debris and oily substances
before inserting center to ensure a good fit
and reduce runout.
3. Firmly insert tapered end of center into
tailstock quill, as shown in Figure 16.
4. Make sure center is securely installed by
attempting to pull it out by hand—a properly
installed center will not pull out easily.
5. Make sure set screw (see Figure 17) is
aligned with quill keyway to ensure center
and quill will not freely rotate under load.
6. Secure quill in place by retightening quill-lock
handle.
Quill
Installing Tailstock Center
Quill Lock
Handle
1. Loosen quill-lock handle, and rotate quill
adjustment knob until quill extends about 1",
as shown in
Figure 16.
Items Needed Qty
Heavy Leather Gloves ................................1 Pair
Clean Rags ........................................ As Needed
Quill
Center
Quill Lock Handle
Keyway
Set
Screw
Quill Adjustment Knob