Grizzly T30945, Руководство пользователя

Страница: 29 / 40

Model T30945 (Mfd. Since 12/19)
-27-
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning &
Protecting
Cleaning the Model T30945 is relatively easy.
Wipe off tile dust with a wet cloth. If dust has built
up in the bath or splash hood, use a mild soap
and warm water to remove it.
Protect the unpainted portions of the table by wip-
ing it clean after every use—this ensures moisture
from operations does not remain on bare metal
surfaces.
The abrasive blade can dull over time but cannot
be sharpened like a normal saw blade. The abra-
sive material of the blade can become covered by
adhesive material, dulling the blade prematurely.
Dressing the blade can re-expose the abrasive
and effectively "sharpens" the blade.
To dress the blade, slowly cut into a dressing
stone, as you would a tile, until the entire band
of abrasive passes through the stone. Repeat as
necessary.
Dressing Blade
Sealed and pre-lubricated ball bearings require
no lubrication for the life of the bearings. All bear-
ings are standard sizes, and replacements can be
purchased from our parts department or a bearing
supply store.
Lubrication
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Loose mounting bolts.
• Damaged blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance
•
Replace bath with fresh water.
• Clean table, rip fence, and miter guide.
• Check wear on blade and dress or replace as
necessary.
Monthly Check
•
Thoroughly clean water bath.