Grizzly T28522 Скачать руководство пользователя | Manualshive

Страница: 27 / 32

background image

Model T28522 (Mfd. Since 09/18)

-25-

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown
are available for purchase. Call

(800) 523-4777 or visit www.grizzly.com/parts to check for availability.

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Labels & Cosmetics

CRUSHING

HAZARD!

Keep hands and
fingers away from
clamping and bending
blocks while bending.

LACERATION

HAZARD!

Chamfer and deburr
sharp metal edges
before bending.

CAUTION

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

Specifications

Max. Workpiece Thickness: 20 Ga. (Mild Steel)
Max. Workpiece Width: 24"
Min. Reverse Bend: 3/8"
Max. Pan Depth: 2"
Bending Range: 0˚–135˚
Weight: 84 lbs.

MODEL T28522

24" PAN & BOX BRAKE

Date

S/N

Mfd. for Grizzly in China

WARNING!

To reduce risk of serious personal injury when using:

  1.  Read and understand manual before using.
  2.  Always wear approved eye protection and leather gloves.
  3.  Mount machine to stable workbench or stand.
  4.  Chamfer and deburr sharp metal edges before bending.
  5.  Do not exceed rated capacity.
  6.  Do not use breaker bar to gain leverage.
  7.  Do not bend wire or nails.
  8.  Always keep hands and fingers away from clamping/bending

block before lowering clamping leaf or raising bending leaf.

9. Do not operate under influence of drugs or alcohol, or when tired.
10. Prevent unauthorized use by children or untrained users.

37

38

39

40

41

42

43

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

37

PT28522037

READ MANUAL LABEL

41

PT28522041

LACERATION WARNING LABEL

38

PT28522038

CRUSHING WARNING LABEL

42

PT28522042

GRIZZLY DOMED LABEL

39

PT28522039

MACHINE ID LABEL

43

PT28522043

TOUCH-UP PAINT, GRIZZLY GREEN

40

PT28522040

SAFETY GLASSES LABEL

«
...
25
26
27
28
29
...
»

Содержание T28522

































Отзывы:

Нет отзывов

Похожие инструкции для T28522

Бренд: Jet Страницы: 2

Бренд: Handler Страницы: 12

Бренд: Milltronics Страницы: 50

Бренд: EINHELL Страницы: 104

Бренд: Tryax Страницы: 37

Бренд: HOLZMANN MASCHINEN Страницы: 23

Бренд: HOLZMANN MASCHINEN Страницы: 65

Бренд: HOLZMANN MASCHINEN Страницы: 68

Бренд: HOLZMANN MASCHINEN Страницы: 93

Бренд: HOLZMANN MASCHINEN Страницы: 121

Бренд: HOLZMANN MASCHINEN Страницы: 148

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды