![Grizzly T28522 Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/grizzly/t28522/t28522_owners-manual_2266729025.webp)
Model T28522 (Mfd. Since 09/18)
-23-
Aligning Bending
Block
To help ensure the bend is even along its length,
the bending block must be mounted flush with the
top of the bending leaf. The bending block is fac-
tory-aligned and should only need re-alignment
after extended use.
Item(s) Needed:
Qty
Open-End Wrench 17mm .................................. 1
To align bending block:
1. Look closely along tops of the bending block
and bending leaf (see
Figure 24) to deter-
mine if they are out of alignment.
Figure 24. Location of hex bolts for aligning
bending block.
3. Align bending block flush with bending leaf,
and then tighten hex bolts.
Top of
Bending Leaf
Top of
Bending Block
Hex Bolt
(1 of 4)
2. Loosen (4) hex bolts (see Figure 24) that
secure bending block to bending leaf just
enough to move it up or down.
Aligning Bending Block