Grizzly T27338, Руководство пользователя

Страница: 10 / 28

Model T27338 (Mfd. Since 01/15) -8
-
Assembly
To assemble flooring nailer:
1. Place handle against flooring nailer
body, as shown in Figure 4, making
sure it is centered from top to bottom.
Figure 6. Handle installed onto nailer.
3. Repeat Step 2 to install remaining
L-bolt. The handle should appear like
the one in
Figure 6 when installed.
Figure 4. Handle placed against flooring
nailer.
Handle
2. Slide an L-bolt into mounting hole and
slot in handle and secure with (2) 8mm
flat washers and (2) M8-1.25 lock nuts,
as shown in
Figure 5.
Figure 5. L-Bolt installed.
x 2
Tip: Place thread locking compound on
lock nuts before threading onto L-bolts,
to prevent nuts from loosening.
L-Bolt