Grizzly T10824 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

Grizzly T10824 Скачать руководство пользователя страница 22

-22-

Model T10824 (Mfd. Since 07/14)

Using Adjustable

Stop

The adjustable stop included in the Model T27044
Accessory Pack (see

Figure 22) attaches to the

rail track and is positioned in front of the saw
body, to provide a stable stopping point. This can
be especially useful when making plunge cuts.

Figure 22. Adjustable stop on rail track.

Adjustable Stop

4. Configure rail adjustment knobs to minimize

play and achieve desired gliding friction (see

Figure 20). When engaged, rail adjustment
knobs can help keep saw from lifting off track.

Figure 20. Location of rail adjustment knobs.

Rail Adjustment

Knobs

Additional rail tracks (Model T10825) can be pur-
chased and joined together for increased cutting
length. To connect multiple tracks, insert connec-
tor into inner grooves of each rail track (see

Figure

21). Flip rail tracks over and slide tracks together
so that the connector is equally-distributed. Use a
straight edge to align tracks, then tighten connec-
tor set screws with a hex wrench.

Adding Rail Tracks

Figure 21. Joining two rail tracks.

Connector

Additional

Rail Track

«
...
20
21
22
23
24
...
»

Содержание T10824

































Отзывы:

Нет отзывов