h8375 portable Fume extractor
-15-
Assembly
two types of suction hood mounting fixtures need
to be assembled. the first type is the clamping
base for the edge of a welding bench. the second
type is the magnetic base for clamping on metal
surfaces. the support arm system and the hood
also require assembly.
To assemble these items:
1. Assemble the hood bracket to the hood using
two
5
/
16
"-18 X
3
/
4
" hex bolts, flat washers, and
lock washers (
Figure 6).
2. secure the hood bracket to the support rod
with the lock lever.
Figure 6. hood and support rod.
3. place the workbench clamp on the edge of
your welding table and tighten in place with
the two hand knobs (
Figure 7).
4. insert the hood support rod into the work-
bench clamp, and tighten the lock knob
(
Figure 7) for clamping option 1.
—For clamping option 2, install the support
arm as shown in
Figure 8.
—For the magnetic clamping option, insert
the rod into the magnetic base and tighten
the knob
as shown in Figure 9.
Figure 7. Work bench clamping option 1.
Figure 8. Work bench clamping option 2.
5. use the the three #10-24 x
3
/
8
" phillips head
screws, and the three hex nuts to assemble
the magnetic base to the magnetic base sup-
port as shown in
Figure 9.
Figure 9. Magnetic base assembly.
support Arm
support rod
hood Bracket
