-12-
h8375 portable Fume extractor
inventory
the following is a description of the components
shipped with your machine. Lay the components
out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
inventory: (Figures 3 & 4)
Qty
A. portable Fume extractor unit ..................... 1
B. Fire resistant 2" dia. suction hose ........... 1
C. pVC 2.5" dia. suction hose ....................... 1
D. hood ........................................................... 1
E. hood Lock Lever ....................................... 1
F. Lock Washers
5
/
16
" (hood Lock Lever) ....... 2
g. Workbench Mount w/Knobs ....................... 1
H. support Arm Lock Knob ............................. 1
i. Magnetic Base ............................................ 1
J. philip head screws #10-24 x
3
/
8
"
(Magnetic Base) ......................................... 3
K. hex nuts #10-24 (Magnetic Base) ............. 3
L. Magnetic Base support w/Knob ................. 1
M. support rod thumb Knob ......................... 1
N. support rod ............................................... 1
O. support Arm .............................................. 1
P. hood Bracket .............................................. 1
Q. Flat Washers
5
/
16
" (hood) ........................... 4
R. hex nuts
5
/
16
"-18 (hood) ............................. 2
S. hex Bolts
5
/
16
"-18 X
3
/
4
" (hood) ................... 2
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4. suction arm assembly.
L
SUFFOCATiON HAzARD!
immediately discard all plastic
bags and packing materials to
eliminate choking/suffocation
hazards for children and
animals.
Figure 3. toolbox and accessories.
A
B
C
d
s
e
o
r
Q
p
n
M
L
K
J
i
g
h
F
