Model G1066R/Z/G1079R (Mfd. Since 02/11)
-7-
Refer to
Figures 48–50 and the following descrip-
tions to become familiar with the basic con-
trols and components of the Model G1066Z.
Understanding these items and how they work will
help you understand the rest of the manual and
stay safe when operating this machine.
G1066Z
A
B
Figure 48. G1066Z—control panel.
E
D
C
A. Sanding Motor ON/OFF Buttons: Push to
start/stop sanding motor.
B. Conveyor Motor ON/OFF Buttons: Push to
start/stop conveyor motor.
C. Conveyor Speed Control: Turn to set con-
veyor belt speed between 0–10 (0–60 RPM).
D. Load Meter: Displays total amp draw of
sanding motor.
E. Emergency Stop Button: Stops motors
when pressed and disables ON buttons.
Remains in depressed position until manually
reset. Reset by twisting button clockwise until
it springs outward.
F. Table Height Crank Handle: Rotate to
raise or lower conveyor table according to
workpiece thickness.
G. Depth-of-Cut Scale: Indicates distance
between conveyor table and sanding drums.
H. Conveyor Table w/Belt (Infeed End):
Height-adjustable table with conveyor belt
that feeds workpieces toward sanding drums.
Figure 50. G1066Z—drum components.
J
I
K
L
I. Micro-Adjustment Lock Lever (1 of 2):
Tighten to lock micro-adjustment knob in
place.
J. Micro-Adjustment Knob (1 of 2): Rotate
to make fine height adjustments of outfeed
(rear) sanding drum.
K. Outfeed (Rear) Sanding Drum: Cylindrical
drum with machined surface that is covered
in hook-and-loop material. Typically wrapped
with fine grit sandpaper to perform finish
sanding portion of operation.
L. Infeed (Front) Sanding Drum: Cylindrical
drum with machined surface that is covered
in hook-and-loop material. Typically wrapped
with coarse grit sandpaper to perform thick-
ness sanding portion of operation.
Figure 49. G1066Z—front controls.
F
G
H
A
B
