Grizzly G0926 Скачать руководство пользователя страница 54

Страница: 54 / 56

-52-

Model G0926 (Mfd. Since 11/20)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

401

402

403

404

405

406

407

408

409

410

411

412

413

To reduce risk of serious injury when using this machine:

1. Read and understand owner’s manual before operating.

2. Never touch moving blade—keep hands out of blade path.

3. Always wear ANSI-approved eye protection and respirator.

4. Only plug power cord into a grounded outlet.

5. Only remove jammed cutoff pieces when blade is stopped.

6. Disconnect power before changing blades or adjusting saw.

7. Maintain adjustment of blade tension, tracking, and guides.

8. Ensure workpiece is securely clamped in vise while cutting.

9. Only run saw with covers closed and all guards in place.

10. DO NOT wear loose clothing, gloves, jewelry, or other

articles that can get entangled in moving parts.

11. DO NOT expose to rain or use in wet locations.

12. Prevent unauthorized use by children or untrained users.

Motor: 3/4 HP, 120V, 1-Ph, 60 Hz

Full-Load Current Rating: 4.5A

Max. Round Cut: 4-1/2" Dia.

Max. Rectangular Cut: 4" x 5-1/2"

Blade Speeds: 85–195 FPM

Std. Blade Length: 64-1/2"

Vise Angle Range: 0–45º

Weight: 97 lbs.

Specifications

WARNING!

Mfd. for Grizzly in China

S/N

Date

MODEL G0926

4" X 5-1/2" VS METAL-CUTTING BANDSAW

TIPPING HAZARD!

Always secure head
in down position
with locking pin
before moving.

Labels & Cosmetics

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

401

P0926401

MACHINE ID LABEL

408

P0926408

GRIZZLY.COM LABEL

402

P0926402

READ MANUAL LABEL

409

P0926409

ELECTRICITY LABEL

403

P0926403

EYE/LUNG/SHOCK INJURY LABEL

410

P0926410

TIPPING HAZARD LABEL

404

P0926404

MODEL NUMBER LABEL

411

P0926411

DOOR CLOSED LABEL

405

P0926405

BLADE SPEED LABEL

412

P0926412

MOVING BLADE LABEL

406

P0926406

QR CODE LABEL

413

P0926413

TOUCH-UP PAINT, GRIZZLY GREEN

407

P0926407

TOUCH-UP PAINT, GRIZZLY BLACK

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Содержание G0926

























































Результаты поиска

Содержание G0926

Отзывы:

Бренды по названию

Популярные бренды

Grizzly G0926, Руководство пользователя

Результаты поиска

Содержание G0926

Отзывы:

Бренды по названию

Популярные бренды