Grizzly G0897, Руководство пользователя

Страница: 18 / 36

-16-
Model G0897 (Mfd. Since 6/19)
3. Remove (4) pre-installed M8-1.25 hex bolts
and 8mm flat washers from top of pedestal
(see
Figure 10).
4. Attach grinder body to pedestal with fasten-
ers removed in Step 4 (see Figure 11).
6. Install eye shield with fasteners removed in
Step 5. Remove protective covering (see
Figure 13).
9. Install work rest with fasteners removed in
Step 8.
8. Remove (2) pre-installed M6-1 x 16 hex bolts
and 6mm fender washers shown in Figure
15.
7. Install spark trap in slot located beneath con-
tact wheel (see Figure 14). Tighten knob to
secure position.
Figure 12. Eye shield hardware.
Figure 10. Top of pedestal. Figure 13. Eye shield attached.
5. Remove (1) pre-installed M5-.8 x 18 cap
screw and 5mm lock washer shown in Figure
12.
Figure 11. Grinder attached to pedestal.
Figure 14. Installing spark trap.
Spark Trap
Knob
Slot
Figure 15. Work rest hardware.