Grizzly G0809, Руководство пользователя

Страница: 19 / 72

Model G0809 (Mfd. Since 1/17)
-17-
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Component Inventory (Figure 7) Qty
A. Jointer/Planer (not shown) .......................... 1
B. Jointer Fence Assembly & Carriage .......... 1
C. Jointer Knife-Setting Jig ............................. 1
D. Planer Knife-Setting Jig .............................. 1
E. Push Blocks ................................................ 2
F. Hex Wrench 3, 4, 5, 6, 8mm ................1 Ea.
Component Inventory (Figure 7) Qty
G. Planer Table Elevation Handwheel............. 1
H. Wheel Assembly (Front) ............................. 2
I. 4" Wire Hose Clamp ................................... 1
J. Adjustable Feet .......................................... 2
K. Foot Pedal Caster Wheel Assembly .......... 1
Figure 7. Component inventory.
B
G
I
H
D
E
F
C
J
K