Grizzly G0783 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 48

Grizzly G0783 Скачать руководство пользователя страница 16

-14-

G0783 (Mfd. Since 05/15)

Children and visitors may be

seriously injured if unsuper-

vised around this machine.

Lock entrances to the shop

or disable start switch or

power connection to prevent

unsupervised use.

Workbench Load

Refer to the

Machine Data Sheet for the weight

and  footprint  specifications  of  your  machine.
Some  workbenches  may  require  additional  rein-
forcement  to  support  the  weight  of  the  machine
and workpiece materials.

Consider  anticipated  workpiece  sizes  and  addi-
tional  space  needed  for  auxiliary  stands,  work
tables,  or  other  machinery  when  establishing  a
location  for  this  machine  in  the  shop.  Below  is
the  minimum  amount  of  space  needed  for  the
machine.

Placement Location

Site Considerations

Figure 7. Minimum working clearances.

45"

43"

Lifting & Placing

Lifting heavy machinery

or parts without proper

assistance or equipment

may result in strains, back

injuries, crushing injuries,

or property damage.

To lift and place machine:

1. Remove hex bolts and hex nuts holding

machine to pallet.

2. Thread (4) eye bolts (see Figure 8) into exte-

rior of saw cabinet.

3. Secure saw headstock in downward position

with a length of strapping or rope, and ensure
miter lock lever is in locked position (see

Figure 8).

4. Thread lifting straps through eye bolts, or

attach shackles (not included) to eye bolts for
larger lifting straps.

5. With helper on ground to help guide machine,

use forklift to lift machine off pallet as shown
in

Figure 8, and place machine in intended

location.

6. Remove eye bolts from saw cabinet.

Figure 8. Lifting and placing saw.

Lifting

Straps

Eye

Bolts

Eye

Bolts

Miter Lock

Lever

«
...
14
15
16
17
18
...
»

Содержание G0783

















































Отзывы:

Нет отзывов