
Model G0771 (Mfd. Since 8/15)
-51-
Using the Auxiliary Fence & Push
Block
1. Place auxiliary fence on table and clamp
it to fence at both ends, then adjust dis-
tance between auxiliary fence and blade—
this determines how wide workpiece will be
ripped (see
Figure 95).
Workpiece
Cutting Width
Blade
Auxilliary Fence
Figure 95. Adjusting ripping distance between
blade and auxiliary fence.
Auxilliary Fence
Blade
Workpiece
Push Stick
for Side
Support
Blade Path
Push
Block
Figure 96. Push block in position to push
workpiece through blade.
2. Install blade guard, then remove right spread-
er pawl, as explained on
Page 32, so it does
not interfere with push block lip.
3. Place workpiece 1" behind blade and evenly
against table and auxiliary fence.
Keep blade guard installed and in down
position. Failure to do this could result in
serious personal injury or death.
4. Turn saw ON, then begin ripping workpiece
using a push stick for side support.
5. As workpiece nears end of cut, place push
block on auxiliary fence with lip directly
behind workpiece, then release push stick
just before blade.
6. Guide workpiece rest of way through cut with
push block, as shown in
Figure 97.
Push
Block
Lip
Release
Push Stick
Before Blade
Blade Path
Figure 97. Ripping with push block.
Turn OFF the saw and allow blade to come
to a complete stop before removing cut-off
piece. Failure to follow this warning could
result in serious personal injury.
7. Re-install spreader pawls when finished using
auxiliary fence and push block.
Содержание G0771
Страница 84: ......