Grizzly G0751, Руководство пользователя

Страница: 35 / 64

Model G0751 (Mfg. Since 1/13)
-33-
Table ball Oilers
oil type ......Model t23963 or iso 32 equivalent
oil amount ......................................... 1–2 pumps
Lubrication Frequency ...........8 hrs. of operation
proper lubrication of the three table ball oilers
(shown in
Figure 35) is done with a pump-type oil
can that has a plastic or rubberized cone tip (see
Page 29 for offerings from grizzly). We do not
recommend using metal needle or lance tips, as
they can push the ball too far into the oiler, break
the spring seat, and lodge the ball in the oil galley.
push the tip of the oil can nozzle against the ball
oiler to create a hydraulic seal, then pump the oil
can once or twice. if you see sludge and contami-
nants coming out of the lubrication area, continue
pumping the oil can until the oil runs clear. When
finished, wipe away the excess oil.
Figure 35. table ball oiler locations.
Dovetail Ways
oil type ......Model t23962 or iso 68 equivalent
oil amount ............................................thin Coat
Lubrication Frequency ...........8 hrs. of operation
Use the table controls to access the entire length
of the dovetail ways (see
Figure 36), then clean
them with mineral spirits and shop rags.
Note: The table and saddle each have two oppos-
ing ways.
When dry, apply a thin coat of oil to the surfaces.
Move each component through the entire path of
travel to distribute the lubricant.
Figure 36. dovetail way locations.
saddle dovetail Way
(1 of 2)
table
dovetail
Way
(1 of 2)