Grizzly G0720R, Руководство пользователя

Страница: 14 / 56

-12-
Model G0720R (Mfg. Since 11/10)
Figure 4. Inventory.
E
H
F
I
C
G
D
Figure 3. G0720R out of the crate.
A
B
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Box 1: (Figures 3 & 4) Qty
A. Assembled Mill ........................................... 1
B. Drill Chuck .................................................. 1
C. Open End Wrench 8/10mm ........................ 1
D. Open End Wrench 14/17mm ...................... 1
E. Open End Wrench 19/22mm ...................... 1
F. Spindle Lock Pin ........................................ 1
G. Chuck Key .................................................. 1
H. Fuse 1 Amp, Fast-Blow 5 x 20mm ............. 1
I. Fuse 2 Amp, Fast-Blow 5 x 20mm ............. 1
J. Hex Wrench Set 4, 5, 6, & 12mm ..........1 Ea
K. Bottle for Oil ............................................... 1
J
K