-2-
Model G0711 (Mfg. Since 7/10)
READ THIS MANUAL. This tool may cause per-
sonal injury if used incorrectly. Read this manual
for proper safety and operating instructions to
reduce this risk.
WEAR EYE PROTECTION. This tool may throw
small fragments during operation, which may
cause serious eye injury. Always wear ANSI
approved safety glasses or face shield to reduce
your risk from this hazard.
WEAR A RESPIRATOR. This tool may produce
fine dust during operation, which can cause respi-
ratory injury if inhaled. Always wear a respirator
NIOSH approved for the type of material being
processed.
WEAR HEARING PROTECTION. This tool is
very loud during operation and can cause per-
manent hearing loss. To reduce your risk, always
wear hearing protection, such as ear plugs or ear
muffs while operating.
MAINTAIN SAFETY GUARDS. your tool may be
equipped with safety guards or other structural
components designed to reduce the risk of injury
during operation. Never modify or operate this
tool with any guards or components removed or
damaged.
KEEP CHILDREN AWAY. Children can injure
themselves with this tool. Disconnect and lock the
tool away when not in use.
AvOID ENTANGLEMENTS. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry that may be caught in moving parts.
Wear a hair covering to contain long hair.
USE CORRECT AIR PRESSURE. Exceeding the
maximum PSI rating of this tool may cause unpre-
dictable operation or bursting.
DISCONNECT AIR PRESSURE before servic-
ing, changing accessories, or moving to another
location. Never leave this tool unattended when
connected to air.
SECURE TOOLING. Always verify tooling is
secure before operation.
SHARP SURFACES. DO NOT place hands near
the tooling surfaces when in operation.
REMOvE ADJUSTING KEYS AND WRENCHES
AFTER USE. These tools become dangerous
projectiles if left on the tool when it is started.
AvOID FLAMMAbLES. Do not use around flam-
mables that may be ignited by sparks.
SECURE WORK. Use clamps or a vise to hold
work when practical. Otherwise, use both hands
when shaping workpiece.
MAINTAIN TOOLS WITH CARE. Keep tools
lubricated and clean for best and safest perfor-
mance.
DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
CHECK FOR DAMAGED PARTS bEFORE
USING. Check for binding and alignment of parts,
broken parts, part mounting, loose bolts, and any
other conditions that may affect operation. Repair
or replace damaged parts before operating.
USE GOOD LIGHTING. Keep work area well
lighted. Dark work areas increase risk of injury.
AvOID UNINTENTIONAL OPERATION. Always
disconnect air when not in use.
USE RECOMMENDED ACCESSORIES. Using
improper accessories may increase risk of injury.
NEvER ALLOW UNTRAINED USERS TO USE
THIS TOOL WHILE UNSUPERvISED.
IF YOU ARE UNSURE OF THE INTENDED
OPERATION, STOP USING TOOL. Seek formal
training or research books or magazines that spe-
cialize in pneumatic tools.
bE AWARE OF HOSE LOCATION. Hoses can
become a tripping hazard when laid across the
floor in a disorganized fashion.
DO NOT USE UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL, OR WHEN TIRED.
