Grizzly G0577, Инструкция по эксплуатации

Страница: 11 / 20

G0577 Fretboard Radiusing Attachment
-9-
9.
Slide the height adjustment arms into the
locking plates, as shown in
Figure 9 , with the
hanger openings outward, and tighten the
hex bolts.
11.
Adjust the height adjustment arms until the
swing arm is seated into the hangers and
both ends are an equal distance above the
sanding belt.
12. To use the full surface of the sanding belt,
slide the horizontal adjustment arms so the
swing arm is diagonal across the sanding belt
surface.
10.
Place the swing arm into the hanger open-
ings as shown in Figure 10 .
Figure 10. Swing arm placement.
Figure 9.
Height adjustment arm installation.
Height
Adjustment
Arms
Height
Adjustment
Arms