Grizzly G0524, Руководство пользователя, Страница: 31 / 60

Model G0524 (Mfd. Since 7/16)
-29-
The lube reservoir (
Figure 33) houses the oil that
lubricates the conveyor track. The oil is pumped
through a series of plastic tubes at a rate of 3-6 cc
every 5 minutes, and onto a brush under the main
table. When the oil level in the reservoir becomes
low, a switch is triggered that prevents the saw
from being operated. If this occurs, fill the reser-
voir above the “low” line and the saw will operate
normally.
Figure 33. Lube reservoir.
Lube System
The sealed ball bearings in this machine are per-
manently sealed and lubricated. There is no need
to lubricate them. If the bearing wears out, sim-
ply replace it with one ordered from our service
department.
Bearings
Inspect V-belts for damage or cracks after every
month (160 Hours) of regular use.
V-Belts
Oil Type ......Mobil Vactra 2 or ISO 68 Equivalent