Grizzly G0524, Руководство пользователя, Страница: 26 / 60

-24-
Model G0524 (Mfd. Since 7/16)
To install the auxiliary rollers:
1. Using a 13mm wrench, remove the 4 hex
nuts from the setscrews on the underside of
the head casting (
Figure 26).
3. Slide the 4 auxiliary roller brackets over the
setscrews and secure them with the four
M6-1.0 hex nuts and 6mm flat washers, as
well as the 4 hex nuts removed in
step 1
( Figure 28).
4. Using a 5mm Allen wrench, secure the 4
auxiliary rollers to the brackets with the 8 cap
screws and lock washers (
Figure 29).
2. Using a 3mm Allen wrench, remove the four
M6-1.0 x 10 setscrews from the bottom edge
of the head casting and replace with the four
M6-1.0 x 30 setscrews (
Figure 27). Note—
The head of the M6-1.0 x 10 setscrews will
be recessed up in the head casting.
Figure 26. Hex nut.
Hex
Nut and
Setscrew
(1 of 4)
Figure 27. Setscrew.
Setscrew (1 of 4)
Note—Will be recessed
Figure 29. Auxiliary roller
mounting configuration.
Cap Screws &
Lock Washers
Figure 28. Auxiliary roller bracket.
Auxiliary Roller
Bracket
Hex Nut
(Step 1)
M6-1.0 Hex Nut &
6mm Flat Washer