Model G0452/P/Z (Mfg. Since 08/12)
-41-
Cleaning the Model G0452/P/Z is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and
steel with a non-staining lubricant after cleaning.
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily:
•
Vacuum all dust on and around the
machine.
•
Wipe down tables and all other unpainted
cast iron with a metal protectant.
Monthly Check:
•
V-belt tension, damage, or wear.
•
Clean/vacuum dust buildup from inside cabi-
net and off of motor.
To ensure optimum power transmission from the
motor to the blade, the V-belt must be in good
condition (free from cracks, fraying and wear)
and properly aligned and tensioned (refer to the
instructions on
Page 20).
Since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
Table ways and the fence assembly should not
be lubricated. If the tables appear to be stuck,
disassemble and clean any foreign materials
from the ways. Re-assemble and reset the gibs.
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
V-Belt
Cleaning
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like G96
®
Gun Treatment, SLIPIT
®
, or
Boeshield
®
T-9 (see
Section 5: Accessories on
Page 37 for more details).
Unpainted Cast Iron
Lubrication
Содержание G0452
Страница 64: ......
