93
GB
supply.
Use of an RCD reduces the
risk of electric shock.
• Connect the equipment to a plug
socket with a leakage-current-operated
circuit breaker (FI switch), with a rated
current of not more than 30 mA.
•
If the power cable for this equip
-
ment is damaged, it must be re-
placed by the manufacturer, a cus-
tomer service agent of the same or
a similarly qualified person in order
to prevent hazards.
Personal safety
•
Stay alert, watch what you are do
-
ing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or un
-
der the influence of drugs, alcohol
or medication.
A moment of inatten-
tion white operating power tools may
result in serious personal injury.
•
Use personal protective equipment.
Always wear eye protection.
Protec-
tive equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
•
Prevent unintentional starting. En-
sure the switch is in the off-position
before connecting to power source
and/or battery pack, picking up or
carrying the tool.
Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
•
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
•
Do not overreach. Keep proper foot-
ing and balance at all times.
This
enables better control of the power tool
in unexpected situations.
•
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov
-
ing parts.
Loose clothes, jewellery
or long hair can be caught in moving
parts.
•
If devices are provided for the con-
nection of dust extraction and col
-
lection facilities, ensure these are
connected and properly used.
Use
of dust collection can reduce dust-
related hazards.
Power tool use and care
•
Do not force the power tool. Use the
correct power tool for your applica
-
tion.
The correct power tool will do
the job better and safer at the rate for
which it was designed.
•
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
•
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any ad
-
just -ments, changing accessories,
or storing power tools.
Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
•
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
Power tools are dan-
gerous in the hands of untrained users.
•
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
Содержание EHS 900 L
Страница 2: ...2 1 10 11 12 13 14 15 2 4 6 7 8 9 A B 16 17 18 8 9 7 7 5a 5b 19 6 1 2 4 5a 5b 7 ...
Страница 3: ...3 C D E 11 4 a b 4 6 6 7 20 21 21 22 5a 5b 5b 5a 10 18 18 ...
Страница 100: ...100 GB ...
Страница 144: ...144 ...