6
©Alcor 2011 All rights reserved
SAFETY PRECAUTIONS
Do not allow other people to be near the machine during operation (except operator)
Other workers on the job site must wear eye protection when in the vicinity of the Planer.
Be certain all guards, shields and covers are secure and tight before starting.
Never operate a planer that is damaged in any way. Repairs or replacement of damaged components must be made
by a qualified mechanic
Do not modify the equipment. Do not operate a modified piece of equipment.
Never reach into the planer disc area when the engine is operating. Keep hands and feet away from planer disc.
Wear safety footwear, eye protection and snug fit clothing.
Operate the Planer only from the “Walk Behind” position.
Operate on flat, level roofs only.
Use only
GRIZZLY
planer blocks.
Keep away from electrical lines.
Use caution when handling fuel. Gasoline is very flammable. Shut off engine, and allow cooling before refuelling.
Clean up gasoline before restarting.
Guard all openings on the roof.
Do not allow anyone to walk in front of the Planer.
Do not operate within 10 feet of roof edge (or within 6 feet, if operating parallel to the edge).
Never lilt the machine during planning.
Do not operate this machine if you are under the influence of alcohol, marijuana, or drugs that could impair judgment
and ability.
Keep the equipment in good condition.
Do not walk backward while operating.
Remove loose debris before planning.
The owner or operator must see that all warning decals are in place and legible. Write to
GRIZZLY
Equipment for
replacement decals and instructions.
Make certain the operator and others in the vicinity wear a respirator and other protective gear as conditions warrant.
Inspect disc and block tightness before starting engine. Do not operate with damaged or worn out blocks.
Keep away from planning disc and chain guard when starting the engine and when the engine is running.
Keep guard chains in good working order to prevent material from flying out from underneath.
